This site has limited support for your browser. We recommend switching to Edge, Chrome, Safari, or Firefox.


Currency

Cart 0

No more products available for purchase

Products
Pair with
Estimate shipping
Add order notes
I give authority to leave the package if unattended (Yes/No)
Subtotal Free
Shipping, taxes, and discount codes are calculated at checkout

Your Cart is Empty

Egon DC-Hub 2.1 Combo Kit with Power Distribution Hub Bracket and Cover For Dual Battery Systems

SKU: KIT-DCHUB150
$710.00

Compatible with 12V or 24V dual battery systems in 4WDs, caravans, camper trailers, marine vehicles, overland rigs, off-grid homes, and solar DC applications.

EGON DC-Hub Version 2.1

Stainless-steel mounting bracket

Clear plastic protective cover

Instruction manual with connector map and fuse placement guide

Bracket and cover dimensions: 320mm(W) x 160mm(D) x 70mm(H)

The EGON DC-Hub eliminates the expertise barrier in 12V/24V wiring. It simplifies installation with high-quality, screw-type connectors—no crimping or soldering required. V2.1 has been tested under extreme conditions and continues to perform under high-load use.

[{"variant_id":"32527738404973" , "metafield_value":""}]

Egon DC-Hub 2.1 Combo Kit with Power Distribution Hub Bracket and Cover For Dual Battery Systems

$710.00
Description

The EGON DC-Hub 2.1 Combo Kit is the ultimate power distribution solution for building professional-grade dual battery systems in 12V or 24V setups. T

his version includes the DC-Hub Version 2.1 along with a custom-designed stainless-steel mounting bracket and clear protective cover. The hub connects all essential DC system components—batteries, chargers, solar inputs, and accessories—into a single, simplified fuse-and-connector layout. No lugs, crimps, or heat-shrink required. 

Just strip the wire, insert, and tighten. Ideal for 4WDs, RVs, boats, and off-grid builds, this is a proven, plug-and-play power control centre engineered for durability, safety, and ease of use.

FEATURES


Version 2.1 supports 12V and 24V systems

Simplifies installation by removing the need for fuse boxes, crimping, and special tools

Connects all major DC system components: chargers, solar, DC-DC, and loads

Includes visible status indicators for fuse failures

Prevents voltage drop through tight, secure fuse seating

Overbuilt PCB and terminals tested to destruction and beyond

Bracket provides easy mounting and vibration resistance

FAQ's

Q: Does this kit include fuses?
A: No. Fuses are not included. See our recommended fuse kits separately.

Q: Can I use this with a lithium battery system?
A: Yes. The hub supports LiFePO4, AGM, and other common battery types.

Q: Is the bracket necessary?
A: It’s included in this kit and strongly recommended for secure, visible installation.

Specifications

Inputs

Aux battery 150A max

Start battery 80A max

Unregulated solar

Regulated solar

DC-DC Charger 80A max, now with 2 fuses

 

Fused Outputs

High-capacity output 80A max, now with 2 fuses

2 input/output 40A, 80A max intermittent (<10 minutes)

10 x 25A general output

 

Fuse Failure Indicators

Should a fuse blow the corresponding red LED will glow, indicating a failure Fault-tracing then becomes effortless.

 

Spare Fuse Holders

Large x 3

Small x 5

 

Dimensions

width 267 mm

depth 108mm

height 55mm

Installation Information

Mount the hub using the included stainless-steel bracket and secure cables via tie points. Tighten all terminals to the following specs: 150A connector: 3.5Nm, 80A/40A connectors: 1.5Nm, 25A connectors: 0.6Nm.

Use two fuses per circuit where required. Always match fuse size to cable rating and appliance draw.

Fuses sold separately.

Installation Guides

INSTALLATION AND OPERATIONS MANUAL

VIDEO INSTALLATION GUIDE

WIRE SIZE TABLE

Warranty Information


12-month manufacturer’s warranty on the DC-Hub, bracket, and cover components.

PICKUP OR SHIPPING

Pickup available in-store at Elevate Automotive. Shipping Australia-wide and internationally.