Victron SmartSolar Controller MPPT 150/45

Bluetooth Smart built-in: The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers

VE.Direct: For a wired data connection to a Color Control GX, other GX products, PC or other devices

Ultrafast Maximum Power Point Tracking (MPPT): Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30 % compared to PWM charge controllers and by up to 10 % compared to slower MPPT controllers

Advanced Maximum Power Point Detection in case of partial shading conditions: If partial shading occurs, two or more maximum power points may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP

Outstanding conversion efficiency: No cooling fan. Maximum efficiency exceeds 98 %. Full output current up to 40 °C (104 °F)

Flexible charge algorithm: Fully programmable charge algorithm (see the software page on our website), and eight preprogrammed algorithms, selectable with a rotary switch (see manual for details)

Extensive electronic protection:- Over-temperature protection and power derating when temperature is high.
- PV short circuit and PV reverse polarity protection.
- PV reverse current protection.

Internal temperature sensor: Compensates absorption and float charge voltage for temperature

Optional external battery voltage and temperature sensing via Bluetooth: A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers.

Fully discharged battery recovery function: Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function.

Victron SmartSolar Controller MPPT 150/45 - Data Sheet

https://www.victronenergy.com/upload/documents/Manual_SmartSolar_MPPT_150-35__150-45/29694-MPPT_solar_charger_manual-pdf-en.pdf

Victron Energy provides a 5-year limited warranty on this product, covering defects in materials and workmanship under normal use.

Pickup available in-store at Elevate Automotive. Shipping Australia-wide and internationally.

Q: What is the SmartSolar MPPT 150/45?
A: A solar charge controller that optimizes solar panel output to efficiently charge batteries in 12V to 48V systems.

Q: What key specs does it have?
A: It handles up to 45A charge current, supports up to 150V solar input, has over 98% efficiency, and works from -30°C to +60°C.

Q: Does it have Bluetooth?
A: Yes, for wireless monitoring, setup, and firmware updates via the VictronConnect app.

Q: Can I monitor multiple units?
A: Yes, up to 10 controllers can sync via Bluetooth.

Q: Is there a display?
A: An optional display can be added for real-time monitoring.

Q: What applications is it for?
A: Off-grid solar, caravans, boats, remote sites, and emergency power.

Q: What’s the warranty?
A: 5 years limited warranty.