AC-DC 36V 20A Lithium LiFePO4 Battery Charger

Lithium-specific multi-stage charging algorithm

RCM Certified for Australian compliance

Integrated fan cooling system

Aluminium housing for thermal stability and durability

Protection from over-voltage, over-current, reverse polarity, and short circuits

Automatic shutoff when charging is complete

Lightweight and compact for mobile and fixed installations

Can I use this charger on AGM or lead-acid batteries?
No. This charger is specifically designed for lithium iron phosphate (LiFePO₄) batteries and is not compatible with AGM, gel, or lead-acid chemistries.

Is this charger safe to leave connected to the battery?
Yes. The charger automatically stops charging once the battery is full, preventing overcharging.

What type of connector is used on the DC output?
The charger comes with M8 ring terminals pre-installed on a 1.2m cable for easy connection to your battery.

Can this charge a 36V battery bank made of 3 x 12V batteries?
Yes, if your battery bank is configured in series to 36V and all batteries are LiFePO₄.

Does the fan run constantly?
No. The built-in cooling fan is temperature-controlled and will activate as needed during charging to prevent overheating.

What happens if I connect the charger incorrectly?
The charger includes multiple safety protections, including reverse polarity, over-voltage, and short circuit protection.

How long does it take to fully charge a battery?
Charging time will depend on the battery capacity. For example, a 36V 100Ah battery would take approximately 5–6 hours to fully charge from empty.

Can I use this in a sealed or enclosed compartment?
It is not recommended. The charger requires ventilation and airflow to operate safely. Install in a well-ventilated area.

Input Voltage: 200–260VAC

Output Voltage: 43.8–44.4V DC

Output Current: 20A ±1A

Charge Finish Current: 1.4–1.8A

Power Output: Approx. 1050W

Max Ripple Voltage: ≤500mV

Efficiency: ≥88% at full load

Connection Type: M8 Ring Terminals

Cooling Method: Internal fan

Weight: 3.0kg

Housing: Aluminium alloy

Connects to standard 240V mains input.

Output is via M8 ring terminals with 1.2m cable.

Install in a dry, ventilated location away from direct heat or water.

Cooling fan ensures thermal protection during operation

Includes a 2-year limited warranty covering manufacturing defects. Warranty does not cover misuse, water ingress, or incorrect installation.

Pickup available in-store at Elevate Automotive. Shipping Australia-wide and internationally.