Home / Lighting / Driving & light bars
Elevate Automotive
Dual Colour Amber/White dimmable Strip light
EALS-300
A 12V strip light with two colours in one housing, both of them dimmable, and no separate controller to mount or wire. It suits a canopy, a camper, an awning or a work ute, anywhere you want usable light without…
$59.00
Premium-quality dual-colour LED strip designed for durability and all-weather outdoor use. Ideal for camping, off-road, and vehicle applications.
Shipping & collection
*Shipping is calculated at checkout based on your location. Some products can't be delivered to every address.
TWO COLOURS IN ONE
Amber, white, or both together
5 BRIGHTNESS LEVELS
Hold the switch to dim, and each colour keeps its own setting
NO CONTROLLER TO MOUNT
Both switches are built into the end of the light. A two core tail runs straight to 12V and that is the whole install
IP67 SEALED
Fine mounted externally, and it takes a washdown
THREE SIZES
300, 600 and 900mm of lit length to suit the space
A 12V strip light with two colours in one housing, both of them dimmable, and no separate controller to mount or wire. It suits a canopy, a camper, an awning or a work ute, anywhere you want usable light without adding a switch panel to get it.
Two switches are built into the right-hand end of the casing, one orange for the amber and one white for the white. They operate independently. Press white and you get white, press amber and you get amber, press both and you get both together. Hold either switch and that colour dims through five brightness levels, and each colour keeps its own setting, so you can set the amber low for a quiet camp while full white remains one press away for working.
Amber is generally the colour that stays on after dark. It is considerably easier on your eyes than white at close range, and it preserves your night vision when you are looking for something in the canopy.
Wiring is a two-core tail off the end, direct to 12V. No controller, no data wire, no dimmer module to find a home for. This light is 12V only. Do not run it on a 24V system, even through a fused circuit.
It is IP67 sealed against dust and water, so it is suitable for external mounting or in a canopy that sees dust and washdowns.
Three sizes, and the two numbers on each are different measurements. The size in the name is the lit length of the LEDs. The casing is longer, because the switches are built into the end of it. Measure your space against the casing figure, not the LED figure:
- 300mm of LEDs, 360mm of casing
- 600mm of LEDs, 672mm of casing
- 900mm of LEDs, 1002mm of casing
Each light has a 3mm mounting hole at either end. On the 900mm we recommend backing it with double-sided adhesive tape or a bead of Sikaflex along the housing in addition to the end fixings. Neither is supplied.
Backed by a 12 month warranty.
- Amber and white in one housing, run either on its own or both together
- Switches are built into the end of the light, so there is no separate panel or controller to mount
- Hold a switch to dim through 5 brightness levels, set separately for each colour
- Amber is easy on your eyes at close range and does not wreck your night vision
- Wires straight to 12V on a two core tail, with no data wire or dimmer module
- IP67 sealed against dust and water, so it suits external mounting and washdowns
- Three sizes, from 300mm up to 900mm of lit length
- Slim housing with a 3mm fixing hole at each end
ModelEALS-300 / EALS-600 / EALS-900
Voltage12V DC only. Not suitable for 24V systems
ColoursAmber and white, switched independently or run together
Switching2 Switches built into the right hand end of the casing, orange for amber and white for white
DimmingHold the switch to dim. 5 Brightness levels, set separately for each colour
Power6W on the 300mm, 9W on the 600mm, 12W on the 900mm
Lumen output800lm on the 300mm, 1000lm on the 600mm, 1200lm on the 900mm
Ingress ratingIP67
ConnectionTwo core tail, 1.2m, wired direct to 12V. No controller required
MountingOne 3mm fixing hole at each end
