Egon DC-Hub Power Distribution Hub For Dual Battery Systems Integrated Fuse Box
Description
EGON DC-Hub Power Distribution Hub is the new, brilliant way to install a 12/24V DC Dual Battery System
EGON DC Hub Version 2.0 is a unique cost saving device designed to eliminate the expertise needed for vehicle-based DC wiring builds. Now suitbale for 12V & 24V systems. If you are building and installing DC electrics into 4WDs, RVs, boats of all sizes, and even dwellings that run on solar-charged DC setups, this is a marvellous, cost saving and quality-enhancing device.
Description
THIS is a remarkable, new cost and time-saving device is called the DC-Hub. Imagine a simple, extremely robust DC input/output fuse box combination board that reduces workshop time by a large factor, but also does away with the need for specialist expertise when building DC electric setups.
All components are wired to this single central hub, including AC chargers, solar panels and DC-chargers. From the same unit are wires run to all accessories, such as fridges, lights, compressors and more. This can all be done without the need of crimps, lugs, shrinks or expertise. All the time-consuming works is done for you!
It connects all elements of a DC installation, including first battery, auxiliary batteries, DC-DC, alternator, solar, DC-DC and other charging devices.
The highest quality connectors mean that soldered or crimped lugs, as well as heat-shrink is unnecessary.
This reduces labour time and the need for expertise and speeds up fault finding and warranty comebacks.
With the DC-Hub there is no need for the following items:
- Crimps and lugs
- Fuse box
- Heat shrink
- Optional cradle (mount bracket) available
The DC-Hub Bracket is also available separately or you can purchase the kit together.
FOOL PROOF
One of the biggest challenges of electrical installations is the lack of expertise, and the resultant quality shortfalls. With the Egon DC-Hub, there are no need for lugs. No need for heat shrinks. No need for lots of experience. Simply strip the wires, and insert.
NO ELECTRONICS
Because sometimes, analogue is just easier and more reliable, and can be set-up by anyone, anywhere.
TESTED TO DESTRUCTION
We proved that our goal to over-engineer the DC-Hub worked, putting massive current over-loads through the connections and PC board, over extended time periods, resulted in no warping, melting or any significant damage of any kind. We abused it beyond anything that could happen in the real world, and it came back smiling. And amazingly, even though we tested one to destruction - it still works faultlessly. We could not destroy it!
Fuses
The DC Hub does not come with any fuses, but Perth Pro does sell 2 kinds of fuses in a convenient kit
Standard Wedge Fuse Kit 96 Pieces here: https://perthpro.com.au/collections/circuit-protection/products/standard-wedge-fuse-kit-96-pieces
Maxi fuse Kit 48 Pieces here: https://perthpro.com.au/collections/circuit-protection/products/maxi-fuse-kit-48-pieces
Features
- Connects all your DC systems
- No expert knowledge needed
- Gives the cleanest install
- Is compatible with all DC/DC chargers, solar controllers and smart solenoids
- 150A max current capability
- 10 x 25A Outlet, 3 x 80A Outlet
- All have LEDs to indicate a blown fuse
- Saves hours of installation work and components
- Integrated fuse box
- Mounting and protection bracket sold separately
- 12 & 24V compatible
Specifications
Inputs
- Aux battery 150A max
- Start battery 60A max
- Unregulated solar
- Regulated solar
- DC-DC Charger 60A max
Fused Outputs
- High-capacity output 80A max
- General 50A max
- Dual input/output 50A max
- 10 x 25A general output
- 3 x 80A high outputs
Fuse Failure Indicators
- Should a fuse blow the corresponding red LED will glow, indicating a failure Fault-tracing then becomes effortless.
Spare Fuse Holders
- Large x 3
- Small x 5
Dimensions
- width 267 mm
- depth 108mm
- 55mm height
Warranty
- 2 years
Installation Guides
INSTALLATION AND OPERATIONS MANUAL
The board is marked with input instructions and every unit comes with an installation guide. These guides are backed up by installation videos on our YouTube channel.
All DC-Hubs are shipped with instructions and wiring guides.
Other Install Info
Biggest cable size to AUX battery is 1B&S (tight fit), better 3B&S
Biggest cable size to start battery is 6B&S
Other Useful PDFs for installation
EGON DC-Hub Connections and Layouts
Attention:
- fuses are meant to fit tightly in the sockets on the DC-Hub Board
- do not attempt to pry open the receiving sockets to make fuses easier to remove or be reduced
- the tight nature of the fuse in their holders insures minimal voltage-drop
- if they become loose-fitting, the connection may heat up and voltage drop and efficiency will be reduced
- if you find a fuse that is not tight in its holder, we recommend using pliers, gently squeezing the connector before inserting the fuse.
- Pay special attention to the DCDC charger connection fuse (P5)
Videos
Pickup or Shipping
See more information about our pickup and shipping options.
We get you: Ready to drive anywhere!