EA-Logo-RGB-Master_Yellow-Dark-Grey-Black

Popular searches

Shop All Collections
On Sale
Workshops Choice

Cart 0

SIGN UP FOR $10 OFF YOUR FIRST ORDER

Sorry, looks like we don't have enough of this product.

Pair with
Estimate shipping
Add order notes
Is this a gift?
Subtotal Free
View cart
Shipping, taxes, and discount codes are calculated at checkout

Your Cart is Empty

Home / Lighting / Driving & light bars

Toyota-fit dual USB-C charger at an angle, showing the depth of the body behind the panel and the two USB-C ports marked PD on the faceRear view of a Toyota-fit fascia body with a moulded green connector — placeholder reference from the sibling push-button switch variant. The USB-C charger uses a three-wire pigtail (red, black, blue). Regen pending.Toyota Small blank switch reference card showing 21×32mm face and 16.8×19mm body dimensions — placeholder reference from the sibling push-button switch variant, wiring shown is the switch (green/red/red/black) not the USB-C charger (red/black/blue). Regen pending.

Elevate Automotive

Toyota Dual USB-C Fast Charger — 21×32mm Fascia Fit

TSSAB-USBC

Direct-fit dual USB-C fast charger for Toyota factory 21×32mm blank switch panels. QC3.0 supported, blue LED backlight.

21×32mm
Dual USB-C
Up to 3A/port

$25.00

4 interest-free payments of $6.25 with
or finance your build with
We accept
Fits Toyota Factory 21×32mm 'Small' Blank Switch Slotdirect fascia replacement, no cutting or drilling.

Shipping & collection

Worldwide shipping available*
In-store pickup
Professional installation available

*Shipping is calculated at checkout based on your location. Some products can't be delivered to every address.

A dual USB-C charger that clips into the factory 21×32mm blank switch slot on Toyota dash panels. Runs phone, tablet and USB-C headphone charging off both ports at once. Fits factory Small blank locations across HiLux N80, Prado 150, Landcruiser 200, Fortuner GUN156R, Kluger, RAV4, Camry, Corolla, Tacoma and Tundra.

The face sits flush with the factory fascia at 21mm wide by 32mm tall. Behind the panel the body runs 16.8mm by 19mm at the terminal, so it clears trim on every fitment tested. A constant blue LED backlight matches the OEM dash glow. Rear wiring is a three-wire pigtail: red to accessory-switched power, black to earth, blue to the dash light circuit for illumination.

Fuse the accessory feed at the source with an in-line micro-blade fuse tap, not at the outlet. USB output suits phone, tablet and small-device charging, not high-current appliances.

You'll also need

[handle-a]

  • Dual USB-C ports — charges phone and tablet at once
  • QC3.0 fast charging — supported for compatible devices
  • 21×32mm face — direct fit for Toyota Small blank slot
  • Blue LED backlight — matches factory dash illumination
  • OEM-style finish — flush mount, no cutting or drilling
  • Three-wire pigtail — clear colour code, plug-and-play
  • 12V accessory input — taps standard automotive DC circuit

Electrical

Input: 12V DC accessory

Per port: Up to 3A

USB protocol: QC3.0 supported

Physical

Face: 21 × 32 mm

Body: 16.8 × 19 mm

Wiring: 3-wire pigtail

Fitment

Fits: Toyota 21×32 blanks

Illumination: Blue LED

Terminals: Pigtail leads

direct fascia replacement, no cutting or drilling.
HiLux N80 (2015-2025) — SR, SR5, Rogue, Rugged X, Workmate, GR Sport, Invincible X
Prado 150 Series (2009-2024) — GX, GXL, VX, Kakadu
Landcruiser 200 Series (2008-onwards)
Fortuner GUN156R (2015+) — GX, GXL, Crusade
Kluger XU40 (2007-2014) — KX-R, KX-S, Grande
Kluger XU50 (2014-2021) — GX, GXL, Grande
RAV4 XA40 (2013-2019) — GX, GXL, Cruiser
Camry ASV50 (2011-2014) — Altise, Atara S, SL, SX
Corolla NZE121 (2006-2013) — Ascent, Conquest, Levin, Ultima
Tacoma N20 (2012-2015) — SR5
Tundra XK50 (2007-2021) — SR5, Limited, Platinum
12V DC accessory circuit only
24V heavy-vehicle electrical — will destroy the charger
Landcruiser 76/78/79 Series — uses a different blank size, check fitment with our sibling Toyota Large USB-C
Prado 250 Series and 300 Series Landcruiser — newer generations use different blank switch sockets, measure blank before ordering

Q: Which Toyota blank switch slot does this fit?
The 21×32mm size, which is the medium-sized fascia blank on the models listed above. Toyota also has smaller 22×22mm slots and larger 22×39mm slots. Pop out the blank and measure across the face before ordering if you are not sure.

Q: What does 'fascia fit' mean?
The charger pops into a factory blank on your dash trim, without cutting, drilling or replacing panels. The face sits flush with the surrounding fascia for a factory look.

Q: What USB output does each port carry?
Each port carries up to 3A at 5V. QC3.0 fast-charge protocol is supported for compatible devices, so a phone or tablet that supports QC3.0 will charge at its rated fast-charge speed.

Q: Does it carry USB-C Power Delivery (PD)?
The face is silkscreened PD. Treat it as fast-charging for typical phones, tablets and USB-C headphones. It is not designed for laptop-power-class devices that want 45W or higher.

Q: Will it work with a 24V heavy-vehicle system?
No. It is rated for 12V accessory circuits only. A 24V feed will destroy the charger.

Q: What are the three wires I need to connect?
Red to accessory-switched power (ignition-controlled), black to vehicle earth, blue to the dash light circuit for illumination.

Q: Does it need a fuse?
Yes. Fuse the accessory feed at the source with an in-line micro-blade fuse tap. A 5A blade fuse covers the load. Do not skip.

Q: What does QC3.0 mean?
Quick Charge 3.0 is a Qualcomm fast-charge protocol built into many phones and tablets. When both charger and device support it, the charger negotiates a higher voltage briefly so the device draws more power without pulling more current.

Q: Will it fit a Prado 250 or 300 Series Landcruiser?
Not confirmed for the newer generations. Those use different Toyota blank switch sockets. Measure the blank on your dash before ordering, or contact us for the matching size.

Q: Can I install this myself?
Yes if you can locate accessory-switched power (ignition on/off) and dash illumination. If you have never tapped a fuse box, our workshop can fit it in about fifteen minutes. This is a 12V DC job so any qualified auto sparky can do it too.

Q: What happens if I plug in a laptop or high-current device?
The port limits output to its rated current. Above the port's supplied current, charging will slow or the device may not charge at all. Do not use it as a general-purpose USB hub for high-draw appliances.

Join our community.