Home / Lighting / Driving & light bars




Altiq
ALTIQ Toyota Large USB Charger — USB-C PD + USB-A QC3.0
TSLAB-USBC
Flush Toyota tall-blank dash USB charger with USB-C PD + USB-A QC3.0, for Landcruiser 200, 70-series, Prado, Hilux and Kluger.
$25.00
Shipping & collection
*Shipping is calculated at checkout based on your location. Some products can't be delivered to every address.
A flush Toyota-fit USB charger that puts a USB-C Power Delivery port and a USB-A Quick Charge 3.0 port into a factory tall blank switch position. Runs phone and tablet charging off the USB-C side with PD fast-charge; runs GPS units, dash cams and older devices off the USB-A side with QC3.0. Fits Landcruiser 200 Series, 70 Series, Prado 150, Hilux, Fortuner and Kluger dash panels that use the 21mm by 39mm tall blank.
The face measures 21mm by 39mm and clips into the panel from the front so the finish sits flush without a bezel. Terminal body behind the panel is 14.9mm by 19.5mm. Wiring is four wires on a green plug: green in for switched 12V, red out to a fused relay, red for accessory power on the dash light circuit, and black to ground.
Wire on a switched accessory feed with an inline blade fuse at the source, not at the outlet. Both ports run at their full rating at once; keep fridges, inverters and other high-draw gear on a dedicated 12V socket, not the USB rail.
- Dual ports — USB-C PD and USB-A QC3.0 on one face
- Fast charge — 3A per port, both live at once
- OEM fit — flush 21×39mm Toyota tall blank
- Clip-in mount — toolless install, no bezel
- Dash-synced LED — wakes with vehicle dash lights
- 4-wire plug — keyed connector, no soldering
Electrical
Input | 12V DC
USB-C | PD, up to 3A
USB-A | QC3.0, up to 3A
Illumination | Dash-synced LED
Physical
Face | 21 × 39 mm
Body | 14.9 × 19.5 mm
Fit | Toyota tall blank
Terminals | 4-wire plug
