Twin panel-mount socket combining a cigarette-style 12V DC outlet and dual USB ports, rubber weather caps on both outlets, rear 2-blade terminals

Elevate Automotive

12V Cigarette Socket + Dual USB Panel Mount

Name: 12V Cigarette Socket + Dual USB Panel Mount
Brand: Elevate Automotive
SKU: KT70506S
Price: 45.00 AUD
Availability: InStock

KT70506S

Twin panel-mount socket combining a cigarette-style 12V DC outlet and dual USB ports on a single flush face. Rubber weather caps, rear 2-blade terminals, 105×45mm face.

15A cigarette socket

2× USB-A, 2.1A combined

12V DC input

$45.00

4 interest-free payments of $11.25 with Afterpay

or finance your build with Allied Finance

We accept Visa Mastercard Amex Apple Pay PayPal Zip Afterpay Finance

Universal fitment12V DC panel-mount socket with cigarette-style outlet and dual USB

Shipping & collection

Worldwide shipping available^*

In-store pickup

Professional installation available

*Shipping is calculated at checkout based on your location. Some products can't be delivered to every address.

A flush panel-mount that puts a 12V cigarette socket and two USB-A ports behind a single cut-out. Runs phone and tablet charging off the USB side; runs a fridge, tyre inflator or work light off the cigarette socket. Fits caravan cabinets, 4WD dash panels, boat helms and canopies with a 3 to 12mm panel.

Both outlets sit under hinged rubber weather caps. The face is 105 by 45mm and clips into the panel from the front so the finish is flush without a bezel. Rear connections are 2-blade spade terminals for straight-in wiring.

The USB ports are for device charging, not high-draw appliances. Rate the DC socket for whatever's plugged into it and fuse both circuits at the source, not at the outlet.

Pairs with

Triple Surface Mount Panel — Three 29mm Accessory Sockets

$13.00

Single Surface Mount Panel — One-Aperture Housing

$9.00

Cigarette-style DC socket — fits standard 12V accessory plugs
Dual USB ports — for phone and tablet charging
Rubber weather caps — hinged, cover both outlets when idle
Flush panel finish — sits clean in dash or cabinet
Rear 2-blade terminals — straight-in spade connectors
Face 105 × 45mm — single cut-out for both outlets

DC socket

Type: Cigarette-style

Voltage: 12V DC

Rating: 15A continuous

USB ports

Type: 2 × USB-A

Output: 5V DC, 2.1A combined

Fitment

Face: 105 × 45mm

Panel thickness: 3 to 12mm

Cutout: 100 × 40mm rectangular

Mount: Flush clip-in

Rear terminals: 2-blade spade

Weather rating: Splash-tolerant, not sealed

Length: 153mm

Width: 122mm

Height: 40mm

Weight: 0.117kg

12V DC panel-mount socket with cigarette-style outlet and dual USB

12V DC systems

24V systems

Mains AC (240V)

Q: What is a cigarette-style socket?
It is the standard 12V accessory outlet fitted to most cars from the factory. It accepts the plug on tyre inflators, phone chargers, small inverters and fridge power leads. The bore is around 21mm and the socket is sprung to grip the plug.

Q: What can I run off the DC socket?
Anything with a standard cigarette-style plug up to the source fuse rating. Typical loads are phone chargers, tyre inflators, portable fridges up to about 7A, GPS units and small inverters.

Q: What do the USB ports charge?
Phones, tablets, cameras, GPS units, headtorches and other USB-powered devices. Higher-draw appliances belong on the DC socket, not the USB side.

Q: Are the sockets fused inside the unit?
No. Fuse both circuits at the source, sized for the biggest load you plan to run through each. A 15A fuse on the DC socket circuit and a 3A on the USB circuit is a good starting point for a typical panel.

Q: Where does it mount?
In a caravan cabinet, a 4WD dash panel, a boat helm, a canopy or any flat panel around 3 to 12mm thick. It clips in from the front and locks behind the panel.

Q: Is it waterproof?
The rubber caps keep dust and splash out of the outlets when they are closed. Neither the DC socket nor the USB ports are sealed while a plug is in them, so mount it in a weather-protected location rather than exposed to weather.

Q: How do I wire it up?
Two rear 2-blade terminals take standard spade connectors. Run positive from a fused source, negative to a chassis or battery ground. Check polarity against the marking on the socket body before switching anything on.

Q: Can I use it with 24V?
The unit is rated 12V DC. Feeding it 24V will damage the USB regulator and may burn out the socket. For 24V systems use a 24V-rated socket.

Q: What panel thickness does it fit?
Around 3 to 12mm. Very thin sheet metal needs a backing washer to keep the clip biting; very thick timber panels may need the cutout rebated on the back so the body sits fully home.

Cart 0

Sorry, looks like we don't have enough of this product.