Home / Lighting / Driving & light bars

Elevate Automotive
30mm EG9 IP68 Right Angle Nylon Cable Gland
H4362
IP68 right-angle nylon cable gland for 4–8mm cable, seals canopy, enclosure and junction box entries against dust and water.
$4.00
Shipping & collection
*Shipping is calculated at checkout based on your location. Some products can't be delivered to every address.
A right-angle IP68 cable gland that seals 4 to 8mm cable entries into a canopy, enclosure or junction box while keeping the cable running flat against the panel. Feeds through a 16mm mounting hole and clamps the sheath with a rubber compression ring behind the nut.
The two-piece nylon body threads together by hand, no special tools needed. UV-stable so it does not chalk or crack sitting on a 4WD canopy or trailer in the sun. The 90 degree body clears the panel by around 25mm, so cable exits parallel to the enclosure wall rather than sticking straight out into whatever is mounted alongside it.
Rate the panel hole at 16mm; a larger hole loses the seal. Snug the compression nut only until the rubber grips the cable sheath firmly, not so tight that the nylon thread strips.
Gland size guide
Pick by the diameter of the cable, including the outer sheath, being fed through:
| Gland | Cable range | Panel hole |
|---|---|---|
| EG9 (this one) | 4–8mm | 16mm |
| EG11 | 5–10mm | 18.5mm |
Need the bigger size?
- IP68 rated, sealed against dust and continuous submersion, not just splashes
- Right-angle body, keeps cable running flat against the panel in tight spaces
- Rubber clamping ring, compresses onto the cable sheath for a sealed entry
- UV-stable nylon, resists cracking from sun and weather exposure outdoors
- Two-piece gland, hand-tightens with no special tools needed
Physical
Cable Size: 4–8mm
Panel Hole: 16mm
Angle: 90° Right
Build
Material: Nylon
Colour: Black
IP Rating: IP68

