Home / Lighting / Driving & light bars
Elevate Automotive
Sealed Rocker Switch — 20A 12/24V Illuminated (Full Symbol Range)
SW8349
Sealed 20A illuminated rocker switch. 12/24V DC, 37.5 by 21mm cut-out. Pick the symbol for the accessory it will switch.
$22.00
Shipping & collection
*Shipping is calculated at checkout based on your location. Some products can't be delivered to every address.
A sealed 20A rocker switch that drops into any standard 37.5 by 21mm cut-out. Runs driving lights, work lights, air compressors, camp fridges, reversing cameras, water pumps and any other 12V or 24V accessory the panel needs a labelled switch for. Fits 4WD dashes, canopy fascias, marine helms, caravan control panels and truck cabs.
Body is a moulded polymer housing sealed against dust and moisture. Symbol face is back-lit with a coloured LED that lights when the switch is on. Choose the symbol from the variant list to match what the switch is going to control, then wire the six spade terminals to the accessory, ground and ignition or accessory feed as marked. Terminals accept standard 6.3mm push-on lugs.
20A is the switch rating, not the cable rating. Size the cable and fuse to what the accessory actually draws, fuse the circuit at the source, and use a relay for anything pulling more than 20A continuous.
- 20A rated — handles most direct accessory loads.
- Illuminated face — backlit symbol shows on/off state.
- 12 to 24V — fits every common DC vehicle.
- Sealed front — dust and splash resistant.
- 6 spade terminals — standard 6.3mm push-on lugs.
- Full symbol range — pick the label per circuit.
Electrical
Current: 20A at 12V
Voltage: 12-24V DC
Function: ON/OFF latching
Terminals: 6 x 6.3mm spade
Physical
Cut-out: 37.5 x 21mm
Face: Sealed illuminated
