Search: 960 results found for "elevate alternator upgrade wiring kit"

960 results found for "elevate alternator upgrade wiring kit"

Filters0

Complete Trailer Break-Away System Kit The Engager

$199.00

Set of standard SAE J1284 blade fuses in the full colour range from violet 3A through green 30A, laid flat. Inferred from product family, not visually confirmed this run.

Standard blade fuse, 3A violet. Inferred from product design, not visually confirmed this run.

Standard Blade Fuses — 3A to 30A

$0.90

80W Soldering Iron with 240V AU/NZ 3-pin plug, stainless steel barrel, insulated anti-roll handle, four interchangeable tips and a wire-coil bench stand for automotive wiring work

80W Soldering Iron — 240V Mains with 4 Tips

$89.00

Close-up of a teal Volkswagen van with a blurred natural background and Lazer Lamps Grille Kit for VW Transporter T6.1

Green Volkswagen van on a gravel driveway with trees and a cloudy sky in the background

Lazer Lamps VW T6.1 Grille Kit

From $865.00

Canm8 Cannect Highbeam - 4 CAN Bus Module (Multi Output Interface)

$254.00

24V 2 Pin Flasher Relay, 20A electromechanical thermal flasher with 2 x 6.3mm blade terminals numbered 49 and 49a to DIN 72552, for truck, bus and heavy vehicle indicator and hazard circuits.

Save 16%

24V 2 Pin Flasher Relay — 20A Electromechanical for Trucks & Buses

$40.00 $48.00

Isuzu Grille Mount

From $720.00

Filler Kit suit Fuel Tank

$68.00

Close-up of the 12mm push-fit vent fitting mounted through the corner of the compartment lid, where the hose to the outside of the vehicle connects – Lithium Battery Compartment

Lithium Single Battery Compartment

$590.00

Toyota LandCruiser 78 Series Troopy Interior Kit

Toyota LandCruiser 78 Series Troopy Interior Kit

$13,250.00

Twin MIDI fuse holder with shared bus bar input and hinged cover — bolt-down mount, M5 studs, 30A to 150A per position, 32V DC. For 12V and 24V caravan, 4WD, boat and dual-battery house circuits

MIDI Fuse Holder — Twin with Bus Bar and Cover

$16.00

Flat 12 Pin to Flat 12 Pin Elecbrakes Trailer Brake Controller Adapter

Flat 12Pin to Flat 12Pin Elecbrakes Trailer Brake Controller Adapter

$105.00

Altiq Rogue 7" Mk3 LED driving light bundle: pair of 7" driving lights above a Spectrum Pro RGB-W rock light pod shown with LED board and clear lens cover separated

Altiq Rogue 7" Mk3 LED Driving Light Bundle

From $1,048.00

Retail box for the ALTIQ Wire Hider, black with a red spine, showing the moulded channel on the front and a corner flash reading fits up to 10 AWG

A length of the black wire concealer curved across the frame, showing how the flexible moulding follows a bend

ALTIQ Wire Concealer 1.6M

$30.00

Black moulded rubber boot for a 31-pin female plug, the tapered body opening to the socket face where the red insert and its cavities are visible

31 Pin Female Deutsch-Style Plug and Boot

Deutsch-Style Female Plug with Boot — 31-Pin

$47.00

50A Anderson panel mount with grey fascia plate and included SB50 plug for caravan or 4WD bulkhead

Rear view of 50A Anderson panel mount showing 40 by 21mm cut-out fixing tabs and terminal connections

50A Anderson Panel Mount — Flush Fascia with Included Plug

$19.00

Sealed 12V mini relay in ISO 280 4-pin footprint, black weatherproof body with 6.3mm blade terminals on the bottom face, resistor-protected coil for ECU and canbus trigger circuits

Mini Relay 12V 40A 4 Pin — Normally Open Sealed with Resistor

$14.00

Ford Everest Bonnet Strut & Light Holder Kit (2022+)

Ford Everest Bonnet Strut & Light Holder Kit (2022+)

$180.00

MIDI (AMI) 23A slow-blow bolt-in fuse. Mid-size ISO 8820-3 automotive fuse for 12V and 24V high-current auxiliary circuits, sized between blade fuses and MEGA. Slow-blow curve tolerates motor and compressor inrush without nuisance-tripping. Rated to 32V DC with 1000A interrupt capacity. Inferred from product design, not visually confirmed this run.

MIDI Fuse — 23A Slow Blow

$8.00

Elevate Automotive 300mm dual-wall adhesive-lined heat shrink tubing

Dual Wall Heat Shrink Adhesive Lining (Black & Red) 300mm length

From $1.00

12V Toggle Switch ON/OFF — 20A Sealed Boot SPST

12V Toggle Switch ON/OFF — 20A Sealed Boot SPST

$26.00

Redarc BCDC Alpha50 R battery manager at an angle with its sense module in front, the finned black case carrying the REDARC and BCDC Alpha50 R markings and the input icons down the side

Everything in the Alpha50 R box laid out: the battery manager itself, the sense module, an RJ45 network lead, a battery lead with red ring terminal and in-line fuse, a green sense lead with ring terminal, four mounting screws, a brass terminal bolt and a spare RJ45 plug

Redarc BCDC Alpha50 R — 50A DC-DC Battery Manager

$1,499.00

Toyota Hilux N70 Single Mega Fuse Holder Bracket Stainless

$26.00

Chrome-plated brass tap with a lever handle, a threaded male inlet at one side and a barbed hose tail below the outlet

1/2" BIBLOCK x 1/2" TAIL LOCK

$39.00

Toyota Prado 150 series Piggy Back Adaptor (MY18+)

Toyota Prado 150 series Piggy Back Adaptor (MY18+)

$63.00

TOYOTA FORTUNER/CRUSADE (PRE 2020 FACELIFT) - HIGH BEAM PIGGY BACK ADAPTOR

TOYOTA FORTUNER/CRUSADE (PRE 2020 FACELIFT) - HIGH BEAM PIGGY BACK ADAPTOR

$39.00

Elevate LC70 2.8L battery fuse bracket fitted over the battery, carrying a Bussmann Mega fuse holder with red cables to the DC-DC input

Elevate LC70 2.8L battery fuse bracket installed, with the Mega fuse holder and twin MIDI fuse holders wired and labelled

Toyota LC70 2.8L Battery Fuse Bracket — Mega + Twin MIDI Mounts

$65.00

Quad flush mount housing with four 29mm apertures on a black thermoplastic face

Quad Flush Mount Housing — Four-Aperture Panel

$19.00

Supplementary kit to allow fitment of SS98HP on 300 series GX model only

$52.00

ALTIQ panel-mount USB-C voltmeter module with a blue seven-segment display reading 12.0, shown at an angle with the black moulded body and mounting shoulder behind

ALTIQ square switch reference card. Five wiring points: 01 harness ground negative, 02 relay out positive, 03 harness ground to pin 1, 04 source in positive, 05 dash light in positive to illuminate the switch. Dimensions given are 18mm and 11mm across the terminal block, 19.8mm by 20mm by 12mm for the body, and a 22.5mm by 20.5mm face

ALTIQ USB-C + Voltmeter Push Module — Toyota-Style Switch Blank Fit

$29.00

Redarc Manager Alpha50 battery management system with its RedVision Pro display panel and the fused battery sense module in front of the finned black BMS chassis

Redarc Manager Alpha50 BMS front angle view showing input terminals, status indicators and the Redarc branding on the chassis

Redarc Manager Alpha50 — 12V 50A Battery Management System with RedVision

$3,999.00

Britax 12V mini changeover relay in ISO 280 5-pin footprint, black weatherproof body with 6.3mm blade terminals on the bottom face

Britax 12V mini relay top view showing 30/20A changeover contact rating label on the black sealed plastic body

Britax Mini Relay 12V — 30/20A 5-Pin Changeover

From $9.50

Black moulded rubber boot fitted to a 23-pin male plug, the red insert face and its retaining ring showing at the open end

Deutsch-Style Male Plug with Boot — 23-Pin

$49.00

Black Anderson-style 50 amp connector housing at an angle with two silver contacts laid in front, the moulded body showing its two cable cavities and polarity marks

50A Anderson Plug Black — Suits 8mm² Cable

$9.50

Central Locking Handles - Whale Tail – view 2

Central Locking Handles - Whale Tail

$90.00

Redarc Manager30 BMS1230S3R battery management system with monochrome RedVision remote display showing 30A DC-DC + AC + solar inputs, Elevate Automotive

Redarc Manager30 — 30A Battery Management System with RedVision

$2,149.00

Cart 0

Sorry, looks like we don't have enough of this product.

Filters0

Currency

Cart 0

Sorry, looks like we don't have enough of this product.

Filters0