EA-Logo-RGB-Master_Yellow-Dark-Grey-Black

Popular searches

Shop All Collections
On Sale
Workshops Choice

Cart 0

SIGN UP FOR $10 OFF YOUR FIRST ORDER

Sorry, looks like we don't have enough of this product.

Pair with
Estimate shipping
Add order notes
Is this a gift?
Subtotal Free
View cart
Shipping, taxes, and discount codes are calculated at checkout

Your Cart is Empty

Home / Lighting / Driving & light bars

Range of 19mm metal push button switches on black bodies with LED illumination in blue, green, red and white, plus a silver-body momentary variant, arranged side by sideDetail view of a 19mm metal anti-vandal push button switch, showing the front bezel with integrated LED ring, threaded shaft and rear terminal end for panel-mount installation

Elevate Automotive

19mm Metal Push Button Switch — Latching LED, IP67

MPBS-5-BLACK-BL

19mm metal panel-mount switch with latching action and integrated LED. IP67 sealed, 7A at 12V DC contacts, five-pin colour-coded harness (sold separately). Blue, Green, Red or White LED options plus momentary variant.

IP67 sealed
7A at 12V DC
19mm cutout

$9.00

4 interest-free payments of $2.25 with
or finance your build with
1. LED Colour
2. Switch Colour
We accept
Universal fitment12V or 24V DC panel switch for 4WDs, caravans, boats, canopies and control boxes.

Shipping & collection

Worldwide shipping available*
In-store pickup
Professional installation available

*Shipping is calculated at checkout based on your location. Some products can't be delivered to every address.

A 19mm panel-mount switch with a metal body, integrated LED, and a latching push action. Presses on, presses off. Fits 4WD dash panels, marine helms, caravan control boxes and canopy control panels through a 19mm cutout with a rear locking nut.

Body is IP67-sealed against dust and washdown. Contacts are single-pole double-throw (SPDT), rated to 7A at 12V DC. Five colour-coded flying leads exit the rear through a plug body: white for the switch feed, red and black for the LED positive and earth, blue for normally-closed and green for normally-open. LED options cover Blue, Green, Red and White on the black-body latching variants, plus a silver-body momentary variant.

Contacts are rated for switching, not for direct high-current loads. Run a fridge, winch, spotlight or compressor through a relay and use this switch to control the relay coil. Wire the harness with a small in-line fuse at the source to protect the switch and the load.

Pairs with

19mm Push Button Switch Socket — 5-Pin Prewired Harness

$6.00

  • Latching action — press on, press again for off
  • Metal body — machined housing with IP67 seal
  • Illuminated LED — Blue, Green, Red or White options
  • Momentary variant — silver body with white LED
  • SPDT contacts — normally-open and normally-closed outputs
  • 5-pin harness — colour-coded flying leads via plug body
  • 19mm panel cutout — fits standard anti-vandal blank

Electrical

Voltage: 12–24V DC

Current: 7A max

LED: 12V DC

Contacts: SPDT

Physical

Body: Metal

Cutout: 19mm

Panel: 1–10 mm

IP Rating: IP67

Connector

Pins: 5

Type: Plug fit

12V or 24V DC panel switch for 4WDs, caravans, boats, canopies and control boxes.
12V DC systems
24V DC systems (LED needs a resistor or 12V regulator)
Not for direct high-current loads. Wire winches, inverters and compressors through a relay

Q: What does IP67 actually mean?
IP67 is the ingress protection rating. The switch is fully dust-tight and can be temporarily submerged in water up to 1 metre for 30 minutes without failing. It is not rated for continuous submersion but shrugs off hose-down cleaning, spray from tyres, and heavy rain on an exposed dash.

Q: What does latching mean and how is it different from momentary?
A latching switch stays in whatever position it was last pressed. Press once for on, press again for off. A momentary switch only carries current while the button is held down and springs back to off the moment it is released. The Blue, Green, Red and White LED variants on black bodies are latching; the Silver-body White LED variant is momentary.

Q: What does SPDT mean and why does this switch have five wires?
SPDT stands for single-pole double-throw. One input feed can be routed to one of two output legs. The blue wire is the normally-closed output (current flows through until you press), and the green wire is the normally-open output (current flows through when you press). White is the input feed. Red and black run the LED positive and earth separately.

Q: Can I run a fridge, winch or compressor directly through this switch?
No. The contacts are rated to 7A at 12V DC. That is enough to switch a small LED strip or a relay coil, but not the 20 to 500A loads a winch, large inverter, fridge compressor start current, or air compressor pulls. Wire the switch to a relay coil and let the relay carry the load current.

Q: Does the switch include the wiring harness?
No. The 5-pin prewired harness is sold separately. You can also solder to the terminals directly if preferred.

Q: Can I use one of these as a horn button or a starter button?
The momentary variant (Silver body, White LED) is the right choice for a horn button, starter push, or any pulse-input use where the circuit only stays live while you press. The four latching variants stay latched on until pressed a second time, so they suit fridge on/off, work light on/off, aux circuit toggles.

Q: What panel thickness does it fit?
The threaded shaft accepts a panel thickness of roughly 1 to 10mm secured by the rear locking nut. A 19mm-diameter hole through the panel is required. A step drill or Q-drill leaves the cleanest edge.

Q: Is it OK on a 24V system?
The switch contacts are rated for 12V and 24V DC service, but the LED runs on 12V. On a 24V system, wire the LED through a 12V regulator or add a series resistor sized for 24V to protect the LED.

Q: Which LED colour should I pick?
Colour is personal choice for panel appearance. White and blue read as neutral status indicators, red typically flags critical circuits (fuel pump, kill switch, emergency circuits), and green usually indicates a live output (winch power, work light, fridge on). Match the colour to what makes sense at a glance on the dash.

Q: Are the contacts plated for corrosion resistance?
Yes. The terminal contacts and switch mechanism are plated to resist corrosion in the wet-weather environments this switch is used in.

Join our community.