Home / Lighting / Driving & light bars

Elevate Automotive
Under Bonnet Dual Battery Kit for Mitsubishi Triton MQ-MR (2.4L TD, 2019+)
KIT-UB25-TRITON
Running a fridge, lights and a comms setup off your cranking battery is how you end up stranded at the far end of a track. This under bonnet kit gives the Triton a proper second battery, charged intelligently while you…
$778.50$865.00 Save $86.50
This kit is purpose-built for Mitsubishi Triton MQ-MR 2.4TD models from 2019 onwards. It combines premium components from Redarc and Elevate Brackets to ensure ease of installation and reliable dual battery management.
Shipping & collection
*Shipping is calculated at checkout based on your location. Some products can't be delivered to every address.
Under Bonnet Dual Battery Kit for Mitsubishi Triton MQ-MR (2.4L TD, 2019+)
Elevate Automotive
Vehicle-Specific Fitment
Tray and bracket cut for the Triton engine bay, using factory mount points
25A DC-DC Charging
Charges your auxiliary battery to full while you drive, on standard or smart alternators
Built-In MPPT Solar
Takes solar directly with Green Power Priority, no separate regulator needed
No Drilling Required
Pre-cut cable and a pre-drilled bracket mount to existing factory points
Auto and Manual
Suits both transmissions with no change to the kit
Running a fridge, lights and a comms setup off your cranking battery is how you end up stranded at the far end of a track. This under bonnet kit gives the Triton a proper second battery, charged intelligently while you drive, with every bracket, fuse and length of cable cut to suit the vehicle.
At the centre is the REDARC BCDC1225D, a 25A DC-DC charger that takes your alternator output and delivers a full multi-stage charge to the auxiliary battery, something a simple isolator or VSR cannot do. It accepts a 9 to 32V input and handles both standard and smart variable-voltage alternators, with charge profiles for LiFePO4 lithium, AGM, gel, calcium and standard lead acid.
An MPPT solar regulator is built into the charger, with REDARC Green Power Priority. When solar is available it draws from the panel first and eases off the alternator, saving fuel and taking load off the vehicle. Add a solar blanket later and it plugs straight in, there is no second regulator to buy.
The mounting side is what makes this a kit rather than a box of parts. The REDARC BCDCMB-109 bracket in 304 stainless steel is pre-drilled for the Triton and positions the charger for engine bay airflow. The Hulk 4x4 DBT0321 tray is powder-coated steel and takes an N50 case battery. Everything bolts to factory mount points, with no drilling and no modifications. Six metres of 8 B&S twin core cable, midi fuses, holders, brackets, lugs, heat shrink and conduit are all in the box.
Suits the MQ and MR Triton 2.4L turbo diesel, 2019 onwards, automatic or manual.
The battery is not included. The tray is rated to a maximum battery of 255 x 174 x 220mm and 17kg. The batteries below sit slightly outside that. We fit this kit in our own workshop and have tested and confirmed they do go in, which is why we still recommend them.
For lead acid, the Century Dual Force+ 24X MF, 730CCA, 75Ah → is dual purpose, which suits a second battery that also needs to crank.
For AGM deep cycle there are two options. The Fullriver Deep Cycle AGM 85Ah → is built for repeated deep discharge, which is the pick if you are running a fridge for days at a time. The SSB HVT70D 12V 85Ah 620CCA Dry Cell AGM Deep-Cycle → is a sealed dry cell that handles vibration and heat well in an engine bay.
On lithium, the only lithium battery we will fit under a bonnet is the Invicta Xero, which is built to take engine bay temperatures. No other lithium belongs in an engine bay regardless of whether the case fits the tray.
The charger is solar-ready out of the box. To run a panel or blanket into it you will also need:
- 6mm twin core cable →
- SB50 Anderson plug →
- SB50 cover →
- Solar input bracket → Mounts the plug neatly in the engine bay.
- Everything needed to run a second battery in the Triton engine bay, in one kit
- REDARC BCDC1225D charges at up to 25A while you drive
- Works with both standard and smart variable-voltage alternators
- Built-in MPPT solar regulator with Green Power Priority, so solar is used first
- Charge profiles for LiFePO4, AGM, gel, calcium and standard lead acid
- Charger rated from -20 to 80 degrees Celsius for Australian conditions
- REDARC BCDCMB-109 charger bracket in 304 stainless steel, positioned for engine bay airflow
- Hulk 4x4 DBT0321 powder-coated steel battery tray to suit an N50 case
- Suits both automatic and manual transmissions
- Bolts to factory mount points, no drilling required
- 6m of 8 B and S twin core cable, fuses, lugs, conduit and heat shrink supplied
ChargerREDARC BCDC1225D
Charge Output25A at 12V
Charger Input Voltage9 - 32V
Recommended Battery Bank75 - 200Ah
Solar InputBuilt-in MPPT regulator with Green Power Priority
Alternator CompatibilityStandard and smart variable voltage
Charger Dimensions165mm (L) x 120mm (W) x 37mm (H), 1kg
Charger Operating Temperature-20°C to 80°C
Charger Mounting BracketREDARC BCDCMB-109, 304 stainless steel
Cable Supplied6m of 8 B and S twin core
Max Battery Size255mm (L) x 174mm (W) x 220mm (H)
Max Battery Weight17kg
Battery TypeN50
Battery Types SupportedStandard Lead Acid Calcium content Gel AGM LiFePO4 lithium
Everything this install needs
0 of 0 in the boxFrom the workshop journal
All articles →How To Install A Dual Battery System
Explore the essentials of installing a dual battery system with Elevate Automotive, your go-to experts for enhanced vehicle performance.
Complete Guide to Dual Battery Systems for 4WDs and Caravans
Power your off-grid 4WD adventures with the right battery system. From dual battery setups to lithium vs AGM options, our guide from Elev...
How Do Dual Battery Systems Work?
How dual battery systems work? We cover components, types, and benefits, and why these systems are essential for vehicles with high power...
