Home / Lighting / Driving & light bars



Elevate Automotive
Under Bonnet Dual Battery Kit for Toyota LandCruiser 200 Series 2016+
KIT-UB25-LC200NEW
Running a fridge, lights and a comms setup off your cranking battery is how you end up stranded at the far end of a track. This under bonnet kit gives the 200 Series a proper second battery, charged intelligently while…
$778.50$865.00 Save $86.50
Designed and tested in Australia, the REDARC BCDC1225D and components in this kit are engineered to withstand harsh outback conditions. Vehicle-specific fitment ensures reliable performance and clean installation.
Shipping & collection
*Shipping is calculated at checkout based on your location. Some products can't be delivered to every address.
Under Bonnet Dual Battery Kit for Toyota LandCruiser 200 Series 2016+
Elevate Automotive
Vehicle-Specific Fitment
Tray and bracket cut for the 200 Series engine bay, using factory mount points
25A DC-DC Charging
Charges your auxiliary battery to full while you drive, on standard or smart alternators
Built-In MPPT Solar
Takes solar directly with Green Power Priority, no separate regulator needed
No Drilling Required
Pre-cut cables and pre-drilled brackets mount to existing factory points
Suits Lithium and Lead Acid
Charge profiles for LiFePO4, AGM, gel, calcium and standard lead acid
Running a fridge, lights and a comms setup off your cranking battery is how you end up stranded at the far end of a track. This under bonnet kit gives the 200 Series a proper second battery, charged intelligently while you drive, with every bracket, fuse and length of cable cut to suit the vehicle.
At the centre is the REDARC BCDC1225D, a 25A DC-DC charger that takes your alternator output and delivers a full multi-stage charge to the auxiliary battery, something a simple isolator or VSR cannot do. It handles both standard and smart variable-voltage alternators, so it works with the 200 Series charging system as Toyota built it, and it carries charge profiles for LiFePO4 lithium, AGM, gel, calcium and standard lead acid.
An MPPT solar regulator is built into the charger, with REDARC Green Power Priority. When solar is available it draws from the panel first and eases off the alternator, saving fuel and taking load off the vehicle. Add a solar blanket later and it plugs straight in, there is no second regulator to buy.
The mounting side is what makes this a kit rather than a box of parts. The 304 stainless steel charger bracket is pre-drilled for the 200 Series and holds the charger clear of the radiator and the worst of the engine bay heat. The powder-coated Hulk 4x4 tray takes an N70 case battery, and the whole assembly bolts to factory mount points, with no drilling and no modifications. Six metres of 8 B&S twin core cable, midi fuses, holders, brackets, lugs, heat shrink and conduit are all in the box.
Suits the 1VD-FTV 4.5L turbo diesel V8, 09/2016 onwards, automatic transmission, with the battery mounted in the engine bay.
The battery is not included. We have tested and confirmed the batteries below fit this kit, because these are the ones we fit in our own workshop.
Lead acid. The Century N70ZZXHD MF Overlander 4x4/SUV, 760CCA, 100Ah → is our most-fitted option for cranking and general touring. The Century Dual Force+ 27X MF, 750CCA, 175RC, 90Ah → is dual purpose, which suits a second battery that also needs to crank.
AGM deep cycle. The Fullriver Deep Cycle AGM 105Ah → is built for repeated deep discharge, which is the pick if you are running a fridge for days at a time. The SSB HVT70ZZD 12V 105Ah Dry Cell AGM Deep-Cycle → is a sealed dry cell that handles vibration and heat well in an engine bay.
Lithium. The Invicta Xero 12V 120Ah LiFePO4 → is the only lithium we fit under a bonnet. An engine bay means sustained heat, vibration and dust, and not every lithium is built for it. It is around 10kg lighter than an AGM with far more usable capacity, 3000 plus cycles and Bluetooth monitoring. The BCDC1225D has a dedicated LiFePO4 profile, so it is a straight setup change.
The charger is solar-ready out of the box. To run a panel or blanket into it you will also need:
- 6mm twin core cable →
- SB50 Anderson plug →
- SB50 cover →
- Solar input bracket → Mounts the plug neatly in the engine bay.
- Everything needed to run a second battery in the 200 Series engine bay, in one kit
- REDARC BCDC1225D charges at up to 25A while you drive
- Works with both standard and smart variable-voltage alternators
- Built-in MPPT solar regulator with Green Power Priority
- Charge profiles for LiFePO4, AGM, gel, calcium and standard lead acid
- 304 stainless steel charger bracket, routed clear of the radiator and major heat zones
- Powder-coated steel battery tray to suit an N70 case
- Bolts to factory mount points, no drilling required
- 6m of 8 B and S twin core cable, fuses and lugs all supplied
ChargerREDARC BCDC1225D
Charge Output25A at 12V
Charger Input Voltage9 - 32V
Recommended Battery Bank75 - 200Ah
Solar InputBuilt-in MPPT regulator with Green Power Priority
Alternator CompatibilityStandard and smart variable voltage
Charger Dimensions165mm (L) x 120mm (W) x 37mm (H), 1kg
Charger Operating Temperature-20°C to 80°C
Charger Mounting Bracket304 stainless steel, pre-drilled for the 200 Series
Cable Supplied6m of 8 B and S twin core
Max Battery Size300mm (L) x 175mm (W) x 220mm (H)
Max Battery Weight22kg
Battery Types SupportedStandard Lead Acid Calcium content Gel AGM LiFePO4 lithium
Everything this install needs
0 of 0 in the boxFrom the workshop journal
All articles →How To Install A Dual Battery System
Explore the essentials of installing a dual battery system with Elevate Automotive, your go-to experts for enhanced vehicle performance.
Complete Guide to Dual Battery Systems for 4WDs and Caravans
Power your off-grid 4WD adventures with the right battery system. From dual battery setups to lithium vs AGM options, our guide from Elev...
How Do Dual Battery Systems Work?
How dual battery systems work? We cover components, types, and benefits, and why these systems are essential for vehicles with high power...
